View 2SK344506_4125558.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2SK3445
TOSHIBA Field Effect Transistor Silicon N Channel MOS Type (-MOSV)
2SK3445
Switching Regulator, DC-DC Converter Applications Motor Drive Applications
* * * * Low drain-source ON resistance: RDS (ON) = 90 m (typ.) High forward transfer admittance: |Yfs| = 10 S (typ.) Low leakage current: IDSS = 100 A (VDS = 250 V) Enhancement mode: Vth = 3.0 to 5.0 V (VDS = 10 V, ID = 1 mA) Unit: mm
Absolute Maximum Ratings (Ta = 25C)
Characteristics Drain-source voltage Drain-gate voltage (RGS = 20 k) Gate-source voltage Drain current DC Pulse (Note 1) (Note 1) Symbol VDSS VDGR VGSS ID IDP PD EAS IAR EAR Tch Tstg Rating 250 250 30 20 80 125 487 20 12.5 150 -55~150 Unit V V V A W mJ A mJ C C
Drain power dissipation (Tc = 25C) Single pulse avalanche energy (Note 2) Avalanche current Repetitive avalanche energy (Note 3) Channel temperature Storage temperature range
JEDEC JEITA TOSHIBA
SC-97 2-9F1B
Weight: 0.74 g (typ.)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc).
Thermal Characteristics
Characteristics Thermal resistance, channel to case Symbol Rth (ch-c) Max 1.00 Unit C/W
Notice: Please use the S1 pin for gate input signal return. Make sure that the main current flows into the S2 pin.
4
Note 1: Ensure that the channel temperature does not exceed 150C. Note 2: VDD = 50 V, Tch = 25C (initial), L = 2.06 mH, IAR = 20 A, RG = 25 Note 3: Repetitive rating: pulse width limited by maximum channel temperature This transistor is an electrostatic-sensitive device. Please handle with caution.
2 1
3
1
2006-11-21
2SK3445
Marking
Part No. (or abbreviation code)
K3445
Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish.
Electrical Characteristics (Note 4) (Ta = 25C)
Characteristics Gate leakage current Drain cut-off current Drain-source breakdown voltage Gate threshold voltage Drain-source ON resistance Forward transfer admittance Input capacitance Reverse transfer capacitance Output capacitance Rise time Turn-on time Switching time Fall time Turn-off time Total gate charge (gate-source plus gate-drain) Gate-source charge Gate-drain ("miller") charge tf toff Qg Qgs Qgd Symbol IGSS IDSS V (BR) DSS Vth RDS (ON) |Yfs| Ciss Crss Coss tr ton VGS 10 V 0V 4.7 ID = 10 A RL = 12.5 VOUT 40 10 40 45 22 23 ns nC VDS = 10 V, VGS = 0 V, f = 1 MHz Test Condition VGS = 25 V, VDS = 0 V VDS = 250 V, VGS = 0 V ID = 10 mA, VGS = 0 V VDS = 10 V, ID = 1 mA VGS = 10 V, ID = 10 A VDS = 10 V, ID = 10 A Min 250 3.0 5 Typ. 90 10 2090 280 1000 20 Max 10 100 5.0 105 pF Unit A A V V m S
VDD 125 V - Duty < 1%, tw = 10 s = VDD 200 V, VGS = 10 V, - ID = 20 A
Note 4: Connect the S1 pin and S2 pin together, then ground them except during switching time measurement.
Source-Drain Ratings and Characteristics (Note 5) (Ta = 25C)
Characteristics Continuous drain reverse current (Note 1, Note 5) Pulse drain reverse current (Note 1, Note 5) Continuous drain reverse current (Note 1, Note 5) Pulse drain reverse current (Note 1, Note 5) Forward voltage (diode) Reverse recovery time Reverse recovery charge Symbol IDR1 IDRP1 IDR2 IDRP2 VDS2F trr Qrr Test Condition IDR1 = 20 A, VGS = 0 V IDR = 20 A, VGS = 0 V, dIDR/dt = 100 A/s Min Typ. 320 2.8 Max 20 80 1 4 -1.5 Unit A A A A V ns C
Note 5: IDR1, IDRP1: Current flowing between the drain and the S2 pin. Ensure that the S1 pin is left open. IDR2, IDRP2: Current flowing between the drain and the S1 pin. Ensure that the S2 pin is left open. Unless otherwise specified, connect the S1 and S2 pins together, and ground them.
2
2006-11-21
2SK3445
ID - VDS
50 Common source Tc = 25C 40 Pulse test 9 30 15 10 100 9.5 Common source Tc = 25C 80 Pulse test
ID - VDS
15
12 11
Drain current ID (A)
Drain current ID (A)
8.5
60
10
20
8 7.5
40
9
10
VGS = 7 V
20
8 VGS = 7 V
0 0
2
4
6
8
10
0 0
4
8
12
16
20
Drain-source voltage
VDS (V)
Drain-source voltage
VDS (V)
ID - VGS
50 Common source 40 VDS = 10 V Pulse test 5
VDS - VGS
Common source Tc = 25C 4 Pulse test
Drain current ID (A)
Tc = -55C 20 100 10 25 0 0
Drain-source voltage
30
VDS (V)
3
2
ID = 20 A
1
10 5
4
8
12
16
20
0 0
4
8
12
16
20
Gate-source voltage
VGS (V)
Gate-source voltage
VGS (V)
Yfs - ID
100 Common source 1 VDS = 10 V Pulse test Common source Tc = 25C Pulse test
RDS (ON) - ID
Forward transfer admittance Yfs
(S)
10 Tc = -55C 100 25
Drain-source on resistance RDS (ON) (m)
0.1
VGS = 10 V 15
1
0.1 0.1
1
10
100
0.01 1
10
100
Drain current ID (A)
Drain current ID (A)
3
2006-11-21
2SK3445
RDS (ON) - Tc
(m)
0.3 Common source VGS = 10 V Pulse test 10 5 0.18 ID = 20 A 1000 Common source
IDR - VDS
Drain-source on resistance RDS (ON)
0.24
(A)
Tc = 25C Pulse test 100
0.12
Drain reverse current IDR
10 10 VGS = 0 V
0.06
5 0 -80 -40 0 40 80 120 160 1 0
3
-0.2 -0.4 -0.6 -0.8 -1.0 -1.2 -1.4 -1.6 -1.8 -2.0
Case temperature Tc (C)
Drain-source voltage
VDS (V)
Capacitance - VDS
30000 10000 6
Vth - Tc
Vth (V) Gate threshold voltage
Ciss Coss Common source VGS = 0 V f = 1 MHz Tc = 25C 1 10 100 Crss 1000
5
(pF)
4
Capacitance C
1000
3
2 Common source 1V DS = 10 V ID = 1 mA Pulse test 0 -80 -40 0
100
10 0.1
40
80
120
160
Drain-source voltage
VDS (V)
Case temperature Tc (C)
PD - Tc
200 250
Dynamic input/output characteristics
Common source ID = 20 A Tc = 25C Pulse test 20
Drain power dissipation PD (W)
VDS (V)
160
200
16
Drain-source voltage
50 V 100 VGS 50
100 V 8
80
40
4
10 0
40
80
120
160
200
0 0
20
40
60
80
0 100
Case temperature Tc (C)
Total gate charge Qg (nC)
4
2006-11-21
Gate-source voltage
120
150
VDD = 200 V
12
VGS (V)
VDS
2SK3445
rth - tw
10
Normalized transient thermal impedance rth (t)/Rth (ch-c)
1 Duty = 0.5 0.2 0.1 0.1 0.05 0.02 0.01 0.01 10 PDM t T Duty = t/T Rth (ch-c) = 1.0C/W 1m 10 m 100 m 1 10
Single pulse 100
Pulse width
tw
(S)
Safe operating area
100 ID max (pulsed) * 100 s* 1 ms* ID max 10 (continuous) DC operation Tc = 25C 500
EAS - Tch
Avalanche energy EAS (mJ)
400
(A)
Drain current ID
300
200
1
* Single nonrepetitive pulse Tc = 25C Curves must be derated linearly with increase in temperature.
100
0.1 1
VDSS max 100 1000
0 25
50
75
100
125
150
10
Channel temperature (initial) Tch (C)
Drain-source voltage
VDS (V)
15 V -15 V
BVDSS IAR VDD VDS Waveform AS = 1 B VDSS L I2 B 2 - VDD VDSS
Test circuit
RG = 25 VDD = 50 V, L = 2.06 mH
5
2006-11-21
2SK3445
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
6
2006-11-21

▲Up To Search▲

Price & Availability of 2SK344506

	To Download 2SK344506 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .